Double wall chimney

This chimney is usually installed on the outside wall of buildings. An insulating layer made of insulating wool between the stainless steel exhaust pipe and the outer pipe made of stainless steel ensures a constant temperature in the exhaust pipe and hence a proper functioning exhaust draft.

TEC-DW-CLASSIC

Double wall stainless steel chimney made of high-quality V4A stainless steel for mounting outside the building with 32,5 mm thick mineral insulation between the inner and outer pipes. The stainless steel chimney is used in combination with oil, gas or solid fuel gas fires in pressure-tight operation and withstands exhaust gas temperatures of up to 600 ° C. TEC-DW-CLASSIC is available in diameters from 80 to 600 mm.

Downloads


TEC-DW-HIGH

Double wall stainless steel chimney system made of high-quality V4A stainless steel for the installation as outer chimney and pressure-tight up to 200 Pa. The necessary heat insulation is ensured by a 32,5 mm thick mineral insulation between the inner and outer pipes. TEC-DW-HIGH is suitable for connection to modern oil and gas condensing boilers with flue gas temperatures up to 120 ° C or up to 200 ° C, depending on the sealing material used,. This stainless steel system is available in diameters from 80 to 600 mm.

Downloads


TEC-DW-STANDARD

Double wall stainless steel chimney made of high-quality stainless steel for mounting outside the building wall. It has a 25 mm thick mineral insulation between the inner and outer tubes, each with a wall thickness of 0.5 mm. This stainless steel chimney is used in combination with oil, gas or solid fuel fire places for low pressure operation and withstands exhaust gas temperatures up to 600 ° C. TEC-DW-STANDARD is available in diameters from 130 to 600 mm.

Downloads


TEC-DW-HIGH-STANDARD

Double wall stainless steel chimney made of high-quality stainless steel for mounting outside the building wall and pressure-tight up to 200 Pa. Thermal insulation is ensured by a 25 mm thick mineral insulation between the inner and outer pipes, each with a wall thickness of 0.5 mm. Depending on the respective sealing material, TEC-DW-HIGH-STANDARD is suitable for connection to modern oil and gas condensing boilers with flue gas temperatures of up to 120 ° C or up to 200 ° C. This stainless steel fireplace is available in diameters from 130 to 600 mm.

Downloads


TEC-DW-NOIR

Double wall stainless steel chimney with black matt powder coating. The stainless steel chimney is used in combination with oil, gas or solid fuel fireplaces in negative pressure operation and is suitable for flue gas temperatures of up to 450 °C. TEC-DW-NOIR has a 25 mm thick insulation layer between the inner and outer pipe and is produced in diameters from 130 to 200 mm.

Downloads


TEC-DW-COMPLETE

Double wall stainless steel chimney made of V4A stainless steel with 32,5 mm mineral insulation and pressure-tight up to 5000 Pa . This universally applicable exhaust system has a conical connection technology rather than an inserted seal. It can be used in combination with oil, gas or solid fuel boilers, combined heat and power plants, or even emergency generators with exhaust temperatures up to 600 ° C. TEC-DW-COMPLETE is produced in diameters from 80 to 600 mm.

Downloads


TEC-DW-DESIGN

Matt finish, double-walled stainless steel chimney with retracted plug-in connection in the outer pipe. The elimination of clamping bands between the individual elements creates a unique chimney look which meets the highest architectural requirements. Insulated with 32,5 mm mineral insulation, this stainless steel fireplace is suitable for all oil, gas or solid fuel fireplaces in low pressure operation with flue gas temperatures of up to 600 ° C. Available in diameters of 130 - 250 mm.

Downloads